thick cylinder

Calculation of Monoblock Thick Cylinder's Developed Length

单层厚壁圆筒体展开长度的计算

Three-Dimensional FEA of Large Opening Cylinder with Flatting Nozzle; Fabrication of Thick Metal Micromesh Sieves with High Open Area Using the UV-LIGA Process

大开孔率圆柱壳平齐接管结构三维有限元分析UV-LIGA技术制备大厚度高开孔率精细金属网板

The stress and deformation under elastic-plastic behavior are given for the structure of combined thick cylinder, and the simple deformation on the influence of structural plastic limit load is discussed.

给出了组合厚壁圆筒结构在弹塑性状态下的应力及变形情况，并且论述了筒体变形对结构塑性极限荷载的影响。

Study of Thermal Stress Distribution on Thick Wall Cylinder by Thermal Shock Treatment

厚壁圆筒热冲击作用下应力分布研究

We study stress intensity factor of thick wall cylinder with cracks under dynamic load.

研究了动载荷作用下带裂纹厚壁筒的应力强度因子.

A new method for the thick laminated cylinder with clamped edges

具有固支边的叠层厚柱壳的一种新解法

Study on thermal deformation of thick cylinder in uneven temperature field

非均匀温度场中厚壁圆筒变形研究

One method to decrease the peak stress at the joint of nozzle and thick cylinder was introduced in this article.

本文介绍了一种降低厚壁圆筒与接管连接处应力峰值的方法。

An equation based on thermoelasticity method of thick cylinder in uneven steady-state temperature field was deduced and the experimental results also validate the equation.

用热弹性力学的方法推导了由于热应力和自然膨胀所产生的厚壁圆筒在非均匀温度场中的热变形公式，实验结果证实了公式的可用性。

Coulomb yield-law is used to determine elastic and plastic limiting load of thick cylinder and thick sphere in strength-differential material.

本文利用库仑屈服准则，研究了拉压异性材料厚壁圆筒和厚壁球壳的弹性极限载荷和塑性极限载荷，得出了新的结果和结论。

Stress Intensity Factor of Autofrettaged Thick Cylinder with Two Symmetrical Axial Cracks

用有限单元法计算具有对称轴向双裂纹自增强厚壁圆筒的应力强度因子

The stress intensity factor of an autofrettaged thick cylinder with an axial crack on its external

外壁具有轴向裂纹的自增强厚壁圆筒的应力强度因子

Internal Pressure Measurement for Thick Wall Cylinder In Impact Fatigue Test

带内裂纹厚壁圆筒管冲击疲劳实验中内压测定技术

A study on forming limit of thick cylinder under axial pressure with support of mandrel

厚壁管有芯镦锻成形极限的研究

According to Tresca guide line and thick cylinder's strength theories, the criteria of tube's failure were deduced.

根据Tresca准则和厚壁圆筒强度理论，给出了厚壁钢管的失效判据。

The new result and condusion are drawn Considered the strength-difference effect in material, it shows that the limiting load of thick cylinder and thick sphere have been improved.

计算结果表明，考虑了材料的拉压异性之后，厚壁圆筒和厚壁球壳的极限载荷均有明显提高。

A study on the dynamic stress intensity factor of thick wall cylinder with cracks

带裂纹厚壁筒的动态应力强度因子研究

The validity of computer program is verified and the high efficiency of the proposed algorithm is also demonstrated by the results of a thick cylinder problem subjected to an internal pressure.

文中给出厚壁圆筒蠕变断裂数值算例，计算结果证明了该算法的高效和正确性。

The stressmeter consists of a short solid or thick hollow cylinder of birefringent material.

应力计由双折射材料制成的实心短圆柱体或厚壁空心短圆柱体构成.

3-D nonlinear finite element analysis of combined thick cylinder

组合厚壁圆筒结构的三维非线性有限元分析

For monoblock thick cylinder, the key to get exact developed dimension is to confirm the displacement of interlayer.

对于单层厚壁圆筒体，确定其中性层的位移量是获得正确展开尺寸的关键所在。

Numerical quadrature for dynamic stress intensity factor of thick walled cylinder

数值积分法求解厚壁筒的动态应力强度因子

This paper deals with the calculation and simulation done to the pressure on thick cylinder and heat transfer process of the heat exchanger with the application of ANSYS, which is compared with the theoretical calculating.

应用ANSYS软件分别对厚壁圆筒受压情况、换热器换热过程进行计算模拟，并与理论计算结果进行比较讨论。

Analysis of Stress Field in Thick Cylinder with Circular Crack Arrested by Electromagnetic Heating

含环向裂纹厚壁圆筒电磁止裂的应力场分析

This paper is based on result of visioplasticity test of thick cylinder during axial pressure with support of mandrel, velocity field and strain rate field were established.

本文根据厚壁圆管在两端夹持、有芯轴支撑、轴向加载的条件下，视塑性试验流线分布的结果，建立了变形区域的速度场和应变速率场。

The limiting load of thick cylinder and thick sphere in strength-differential material

拉压异性材料厚壁圆筒和厚壁球壳的极限载荷分析

The nonlinear problem is the hot spot one for structural analysis and design in recent years. The analytic method and the finite element method are utilized respectively to carry out nonlinear analysis for combined thick cylinder.

非线性问题是近年来结构分析与设计的热点问题，文章分别采用解析法和有限元法对组合厚壁圆筒结构进行了非线性分析。

Method to Decrease Peak Stress Occurred at Joint of Nozzle and Thick Cylinder

降低厚壁圆筒与接管连接处应力峰值的方法

A Hydraulic Method of Determining Elastic Failure Pressure for Thick Wall Cylinder

测定厚壁圆筒弹性失效压力的液压方法

Several Methods for Calculating Stress Intensity Factors of Thick Walled Cylinder with Cracks

带裂纹厚壁圆筒应力强度因子的几种计算方法